I have been concerned about electro-magentic frequency and the effects on our bodies for some time now. I have been collecting information for an article about this but so many other people have done excellent research and writing already. A great blogpost on this is by Katie Wells on her Wellness Mama website:
I have found many items to mitigate EMF in your home and encourage you to look up EMF protection on Amazon or your favorite online retailer. During my investigation I have tried several methods of EMF protection and enjoy the small sticker pads you can put on your cell phone. I have not had a headache from my cell phone since I put the sticker on it. I also have them on my laptop and monitors at my desk.
A favorite EMF protection method of mine is orgonite. This incredible material made from a mix of resin, minerals, metals, and other possibly metaphysical items is not only decorative, but the objects act like little waterfalls. The device cleans the energy of the area in which it sits, so the theory goes. I will ratify the theory through personal example: my house feels light and comfortable with orgonite in key areas, I am deeply calmed after holding a piece of orgonite for a short period of time, and life feels easier and happier in general since I started my collection of orgonite. Crystals are excellent for this also, but that is another article!
A really good but short explanation can be found on Karin’s website, Orgonise Yourself:
What can we do to mitigate this on a massive level in our communities, the buildings and homes we occupy for so much of our day? As a construction contractor for a long portion of my career, I understand, to the wire and junction box, how much electrical emission is around us every moment of every day (unless you live in the boonies or happen to be hiking in the woods, even then you probably still have a cell phone in your pocket). The concept of the electro-magnetic assault on us is quite overwhelming.
A flash of brilliance occurred one day as I mused on the electrical mess in which we live. What if we connected a secondary ground wire to the building which was not charged with electricity? Would it absorb the EMF from the electrical system? What if we made a really big ground rod, would this create a really big absorption of the EMF? How about if we located the really big ground rod in a key spot where we found concentrated Earth Energy? Feng Shui and divining have been around for ages, and they can find energy flows under the earth. Using this to site the ground rod might allow for a greater Earth Energy to flow in the secondary ground wire – system actually – which will run into the building and then parallel the normal electrical system. Would this work?
We need to test this theory and I hope you will aid my quest by contributing ideas about how to measure frequency (Hz) levels in the human body and area around it. In the meantime, I needed to protect this idea so that no entity can take it away. To this end I wrote a summary of my ideas which I hope others will build on and further the application of this in our world. I have published it in the Creative Commons (https://creativecommons.org) and sent it to industry influencers for consideration. The text of the summary follows my article.
I hope that everyone on this planet can use the concepts of Grounding, Earthing, and a secondary ground system to mitigate EMF. This concept could save the health and welfare of the entire planet and we should all embrace the knowledge that we are on the earth and of the earth. The connection with the ground is vital and it can be used to heal our communities, create better spaces to be in, and revitalize the energy of the world.
Grounding and Earthing for All: Earth-energy connected Secondary Ground System may mitigate electro-magnetic frequency in areas of electrical installation; This concept and subsequent development of applications, ideas, and products is available to use publicly and privately for all time
By David B. Hults
This is written to ensure that the technology or theories of Grounding, or Earthing, will always and forever be able to be used by all people. The applications of secondary grounding system, sculptural grounding items, sacred geometry designs in public areas, interconnection of grounding systems through the community, and any other related concept will always be open for use. People can engage this technology and theory to create products, innovations, and industry. The science, theory, and application of Grounding and Earthing will never be restricted by patents or entities public and private.
Human bodies are bio-electrical systems. High levels of electro-magnetic frequency are hazardous to humans. All electrical devices and wires create some level of electro-magnetic output. Civilization is increasing the use of electricity around the world. Most devices, including automobiles and industrial technology, are becoming electricity-powered. To mitigate the devastating effects of this electromagnetic assault on our bioelectrical bodies we must install a balancing, secondary grounding system through our personal and public spaces.
Standard electrical installation in construction is at one point or another grounded to the earth. There is a flow of electricity, sending current to power engines and devices. This electrical flow creates the electromagnetic frequency, and the rate of flow (frequency in Hz) corresponds with intensity of the electromagnetic frequency. The theoretical concept we will test is that a secondary, separate grounding system combined with geometric and mineral aspects will create a reduction of the electromagnetic frequency nearby thus allowing for increased human health.
Utilizing the grounding, or earthing, technology we will mitigate the EMF fields created by the standard electrical systems and electronic devices in our communities. A building can be built with the standard electrical system constructed to current building code with all types of interconnected renewable energy and electrical supply. The grounding technology comes into the structure as a secondary ground system, built similarly to the standard electrical system, but separate in its entirety.
The system may be enclosed in the walls and floors of the building. A design application of a stripe or nodes of conductive material, connected to the grounding system, might be placed on the walls at a level reachable by all building occupants. This could be metal plate, a decorative wire, or even crystal in suspension. The purpose of this decorative feature will be to create additional surface area of the secondary grounding system. Also, in theory, a person would be able to connect to the energies of the earth and be grounded by laying their hand on the decorative feature. There are infinite applications of this decorative concept.
The secondary ground system will be anchored to multiple ground rods around the building and will have a full ground loop outside of the electrical system ground loop. In addition, there will be larger, sculptural ground rods integrated into the landscape and public spaces around the building as decorative features. These large ground rods will be specifically placed and designed to connect to concentrated areas of earth energy. The public areas, walkways, and landscape design of the areas around the buildings and through the city can be designed with features shaped by sacred geometric consideration and in designs of sacred geometric patterns. These designs and the large ground rods connected to the secondary ground system will mitigate the harmful EMF levels which are being produced. A side effect of the secondary ground system may be increased overall health and wellness in the community at large.
The level of effect is currently unknown and will need to be researched as to how to appropriately measure the effects. The ground system will be composed of conductive metals, minerals, and man-made compounds. The practice of feng shui and divination will be applied in conjunction with conventional geo-sciences and technology to locate the best site for the sculptural and decorative grounding shapes. These practices will also be engaged to determine the best construction site and orientation of buildings within the urban, suburban, fringe city, small town, and rural locations.
This construction of an EMF mitigating system in buildings and public areas should always be available for people to integrate into their building concepts. The science and products of grounding and earthing technology should always be available for people to utilize in creation of products, technology applications, scientific studies, theoretical development, and any other consideration one might imagine. In similar manner, the concepts of using crystals, minerals, or metals in suspension or otherwise grouped together should always be available to people to make anything that they can think of.
This material in suspension concept is common around the world as decorative objects and may be referred to as an orgone generator, among other names. It will also be used to create art, trim pieces, and building applications where it does not impede or conflict with building code.
The application of this composite material will also assist in the mitigation of EMF and may possibly provide additional health and wellness in the community. Research and testing of the effects of this material will need to be done in the same manner as above.
Subject matter may further be investigated here: